| Missile Command PCB |
| Certification of Diagnostics and Repair |
| GLS1 Electronics Computer Aided Testing System |
| The following is an example of the printout obtained after testing / repairing / verifying of a Missile Command PCB utilizing the GLS1 Electronics Computer Aided Testing Device, certifying the electronics has undergone the quality control requirements set forth by GLS1 Electronics. |
 |
| Results obtained serial # GLS17384 | |
| Test table version: | atari\miscom.tbl version 4.2a | April 02, 2004 |
| Date of certify: | April 08, 2004 12:13:00 | Tested by: gls1 |
| Board voltages | 5.07 volts, 11.98 volts, -4.91 volts | |
| 6502 Socket | Begin tests from CPU socket | |
| Test / Identify program | begin program scan | |
| program range H1 | 820-02.716 rev 02 | |
| program range JK1 | 821-02.716 rev 02 | |
| program range KL1 | 822-02.716 rev 02 | |
| program range LM1 | 823-02.716 rev 02 | |
| program range NP1 | 824-02.716 rev 02 | |
| program range R1 | 825-02.716 rev 02 | |
| program installed test ok rev 02 | ||
| ram chip F4 | ||
| ram chip H4 | ||
| ram chip J4 | ||
| ram chip K4 | ||
| ram chip L4 | ||
| ram chip M4 | ||
| ram chip N4 | ||
| ram chip P4 | ||
| test pattern intro | ||
| flip screen yes | ||
| flip screen no | ||